Keysight Technologies FieldFox A Series User Manual Download Page 541

Page: 541 / 756

Keysight N9927-90001 User’s Guide 541

Channel Scanner (Option 312)
How to Set Up Channel Scanner

—

View Corrections

View Corrections ON OFF

Turn ON and OFF

Yellow Trace - Antenna/Cable corrections. This is a composite of all

cable/antenna corrections that are currently applied. Available as a

useful visual aid, the zero “dB” level (no net correction) is mapped to

appear at the -50 dBm on-screen level.

The following menu appears when any of the above Antenna or Cable softkeys

are pressed:

—

Antenna/Cable ON OFF

Turn correction ON or OFF for this Antenna/Cable.

—

Edit Antenna/Cable

Edit an Antenna/Cable Correction table. See Using the

Antenna/Cable Editor (below) for more information.

—

New

Create a new Antenna/Cable. See Using the Antenna/Cable Editor

(below) for more information.

—

Save Antenna/Cable

Save the modified Antenna/Cable to a file on the

specified Storage Device.

—

Recall Antenna/Cable

Read an existing Antenna/Cable file from the

specified Storage Device.

—

Storage Device

Choose from: Internal, USB, SD. Learn more about these

selections in

“Set File Type and Select Device” on page 677

When finished, press

Back

to return to the previous menu.

Field Strength Correction Examples

Refer to

Figure 26-17 on page 542

and

Figure 26-18 on page 543

Summary of Contents for FieldFox A Series





















































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for FieldFox A Series

Reviews:

Related manuals for FieldFox A Series

Brands by name

Popular brands

Keysight Technologies FieldFox A Series, User Manual

Search results

Summary of Contents for FieldFox A Series

Reviews:

Related manuals for FieldFox A Series

Brands by name

Popular brands