Keysight Technologies FieldFox A Series User Manual Download Page 483

Page: 483 / 756

Keysight N9927-90001 User’s Guide 483

Pulse Measurements Mode – Option 330
Pulse Measurement Settings

Trace Memory

A memory trace is a pulse measurement

Tr 1

data trace (NOT the trace in the

Zoom window) that has been stored in the FieldFox volatile memory. It then

becomes static, meaning it is not updated with normal pulse measurements. It

can be displayed on the screen by itself, or with a pulse trace for comparison

purposes.
The

Tr 1

data trace is displayed in

yellow

The memory trace is displayed in

blue

How to display data and memory traces

— Press

Trace 6

— Then

Trace Memory

— Then

Data->Mem

to store the current live trace into memory. A ‘beep’

sounds to confirm the data trace has been saved to memory. There is no

display annotation that indicates that the memory trace has been stored.

— Press

Data

to view only the data trace.

— Press

Memory

to view only the memory trace.

— Press

Data & Memory

to view both the live trace and the stored

memory trace.

Summary of Contents for FieldFox A Series





















































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for FieldFox A Series

Reviews:

Related manuals for FieldFox A Series

Brands by name

Popular brands

Keysight Technologies FieldFox A Series, User Manual

Search results

Summary of Contents for FieldFox A Series

Reviews:

Related manuals for FieldFox A Series

Brands by name

Popular brands