Keysight Technologies FieldFox A Series, User Manual

Page: 214 / 756

214 Keysight N9927-90001 User’s Guide
SA (Spectrum Analyzer) Mode
How to Set Up EMF Settings (Requires EMF (Option 358), GPS (Option 307), and SA
Mode (Option 233–Mixed Analyzers))
— Press Edit Antenna to edit your existing antenna factors or
press New to add a a new antenna’s factors or to write over
your existing antenna ’s file (i.e., Overwrite existing Antenna
data? is displayed above the table).
— Choose Yes to write over the existing antenna file.
— Choose No to create a new antenna file (default
filename is
Example
).
— Press Add Row to create additional Frequency and Antenna
Factor values.
— Press Delete/Clear then choose one of these:
— Delete Row – when pressed this choice deletes the
currently selected row of Frequency and Antenna
Factors (i.e., you must press Yes to delete a row or
No to exit the current softkey menu).
— Clear All – when pressed this choice deletes all of
the currently selected rows of Frequency and
Antenna Factors (i.e., you must press Yes to deleted
the rows or No to exit the current softkey menu).
— Back – To exit to previous softkey menu.
— Press Done when finished editing to exit.
c. Press Save Antenna to save your changes. See also “File Saving
Naming Options” on page 645 and then to “Alpha Numeric Editing”
on page 645 .
For more information:
— See also “GNSS (GPS+) and GPS” on page 650 .