Keysight Technologies FieldFox A Series, User Manual

Page: 677 / 756

Keysight N9927-90001 User’s Guide 677
File Management
Saving and Recalling Files
How to move a file
— Press Save/Recall 9
— Then Device to be copied from (i.e., Internal, SD, or USB). Refer to “Set
File Type and Select Device” on page 677 .
— Then More
— Then Manage Files
— Then Select Files
— Navigate to the file(s) to be copied using the Up/Down arrow keys or the
knob.
— Then Copy
— Select the destination device using the softkeys:
—— Copy to Internal Copies to FieldFox’s internal memory.
—— Copy to USB Copies to a USB memory device.
—— Copy to SD Card Copies to a SD/SDHC memory card.
—— Cancel to cancel copy file and return to the previous menu
— Use the close folder icon or the open folder icon to locate the target folder
for your files.
— Then Do Copy copies files to selected location and FieldFox displays a
confirmation message of a successful file copy.
— Cancel to cancel copy file and return to the previous menu.
Set File Type and Select Device
The following File TYPE and DEVICE settings are used to determine the type of
file to save, and the location to be used for all file operations.
These two settings remain through an instrument preset, but are reset to the
default values when the FieldFox power is shutdown.
Select Device (location of File Save/Recall)
— Press Save/Recall 9
— Then Device to set the LOCATION where the file is to be saved, recalled, or
moved. Choose from the following:
— Internal Saves/Recalls/Moves (Copies) files to/from the FieldFox
internal memory. To specify a folder, first select Manage Folders
(learn how in “Manage Folders” on page 682 ). The Data Link software
will read data ONLY from the \UserData folder.