Keysight Technologies 1130B Series, User Manual

Page: 10 / 234

10 1130B-Series Probes User’s Guide
1
Getting Started
Channel Identification Rings
When multiple probes are connected to the oscilloscope, use the channel
identification rings to associate the channel inputs with each probe. Place one
colored ring near the probe’s channel connector and place an identical color ring
near the probe head.
Inspecting the Probe
Figure 3 on page 11 shows the accessories that are shipped with the 1130/1/2/4B
probe amplifiers. The probe amplifiers do not come with a probe head unless
selected at the time of order. Any head shown in Figure 2 on page 9 can be
ordered at any time for any 1130/1/2/4B probes.
• Inspect the shipping container for damage.
Keep the damaged shipping container or cushioning material until the contents
of the shipment have been checked for completeness and the probe has been
checked mechanically and electrically.
• Check the accessories.
Table 1 Compatible Oscilloscopes
Oscilloscope Adapter Required
Infiniium Oscilloscopes
S-Series none
90000 X-, and Q-Series N5442A
90000A Series none
86100C/D Series N1022A/B
9000 H-Series none
9000A-Series none
8000A-Series none
InfiniiVision Oscilloscopes
6000 X-Series none
4000 X-Series none
3000 X-Series none
7000A Series none
6000A Series (350 MHz — 1 GHz) none
5000A Series none