KETRON SD5, Owner'S Manual

Page: 79 / 122

SD5
77
that are called up using push buttons PPA
AG GEE ++//--, and include Volume, Reverb, Effects, Pan, Shift, Channel Rx and Channel Tx (already explained in
the previous section). FF110 0 M Muuttee is used to cut-out only the track selected at the time from the reproduction.
THE MIDI PARAMETERS OF THE SD5 SECTIONS
From the main page of the display press FF66 M MIID DII to call up the menus dedicated to the SD5 sections. For each single function the single sections
involved are displayed together with relative value. To move around between the sections use the D
DA ATTA A C CU UR RSSO OR R ((U Upp aanndd D Doow wnn)) push buttons
and use the D DA ATTA A C CU UR RSSO OR R ((LLeefftt aanndd R Riigghhtt)) push buttons to modify the value.
THE MIDI SET-UPS
To simplify programming, the SD5 uses some memory locations called MIDI Set-up's that are used to save the MIDI settings. When a modifica-
tion has been completed in these menus, you can save it by pressing the SSA
AV VEE push button. The options available are the following:
F4 Undo : This returns to the page of MIDI channel settings, restoring the initial situation.
F5 Escape : This returns to the MIDI channel settings page without saving.
F9 Default : This restores the default settings.
F10 Save : This confirms that the settings in the current MIDI set-up are to be saved.
The preferred MIDI set-up can be called up when turning the instrument on using the PPoow weerr O Onn SSeettuupp function. Once the MIDI set-up has been
selected, go back to the initial page of the MIDI menu using FF55 EEssccaappee, press the SSA AV VEE push button, select FF33 PPoow weerr O Onn SSeettuupp and then
confirm using FF110 0 SSaavvee. More details are given in the Power On Set-up section.
THE PARAMETERS OF THE MIDI MENU
F1 Channel Transmit : This is used to associate a MIDI transmitting channel on the MIDI OUT to each section. The following functions
are also available:
F4: this switches between the Channel
Transmit page and Channel Receive page.
FF55 EEssccaappee: This returns to the initial page
of the MIDI menu.
FF110
0 M MIID DII SSeettuupp:: This calls up the settings
already put in order and saved to use the
SD5 via MIDI. The MIDI Set-up currently
selected is also that where the settings
will be saved using the SSA
AV VEE push button.
F2 Channel Receive : This is used to associate a MIDI receiving channel
on MIDI In 2 (Keyboard) to each section. The parameters are the same as FF11 C
Chhaannnneell TTrraannssm miitt.
F3 Transpose Transmit : The value for each single section identifies the
number of transposition semitones applied to the
notes transmitted on the MIDI Out.
F4 Transpose Receive : The value of each section identifies the number of
transposition semitones applied to the notes
received on the MIDI In 2 (Keyboard).
F5 Filter Tx : Valid for all the sections, the MIDI filters being
transmitted are used to enable or disable the
transmission of some MIDI messages such as the
Pitch Bend, some Control Changes and exclusive
system messages. The type of message to be filte-
red is selected using the D
DA ATTA A C CU UR RSSO OR R push but-
tons and is enabled or disabled using the FF110 0
SSeelleecctt push button. The filter is enabled when the
symbol “*” appears next to the MIDI message.
F6 Filter RX : The same as FF55 FFiilltteerr TTxx, but dedicated to the MIDI
messages received on MIDI In 2 (Keyboard).
F7 Program Change Tx : For each section you can establish whether the
MIDI