manualshive.com logo in svg

KETRON SD5, Owner'S Manual

Share
Download
KETRON SD5 Owner'S Manual Download Page 75

SD5

73

M

IDI Accordions

The SD5 can be managed by an Accordion connected via MIDI, thanks to the fact
that the attribution of the MIDI channels to the single parts of the keyboard, the
bass transposition, the velocity and also the use of the bass voices can be con-
trolled. The controls directly depend on the
MIDI implementation of the Accordion therefore, for very simple MIDI accordions
some of the functions described hereafter may not be available.

CONNECTING A MIDI ACCORDION

The MIDI Out Output of the MIDI Accordion should be connected using a MIDI cable
to the MIDI 2 In input (Keyboard) of the SD5.  Enable the Accordion mode on the
SD5.

ENABLING THE ACCORDION AND ITS PARAMETERS

The parameters for the MIDI Accordion are accessed, from the main page of the display, by pressing FF33  U

Uttiilliittyy and, from the first page of the

U

Uttiilliittyy menu, by pressing FF11  A

Accccoorrdd. A new page of dedicated parameters opens. When the Accordion is connected, the Accordion mode is

enabled by pressing F10, which from the disabled mode (denoted by Inactive), becomes enabled (denoted by Active). To disable the Accordion
mode, press the F10 push button again. The Accordion mode calls up a number of MIDI settings that can however be modified as desired.
The following parameters are available in the Utility Accordion menu:

F1 Chord Mode

:

This is used to select two different methods for acknowledging the chords. IInntteerrnnaattiioonnaall is the most widely used system;
B

Beellggiiqquuee is to be used only to acknowledge Belgian chords. Press function push button FF11 to switch from one system to the
other.

F2 Left Velo

:

This selects the velocity curve for the notes played manually using the chords of the Accordion. By pressing the FF22 function
push button repeatedly you can select the response curve. In the case of FFiixxeedd curve you can enter the fixed velocity value
applied to the notes played using the D

DA

ATTA

A  C

CU

UR

RSSO

OR

R push button.

F3 Right Vel

:

The same as for FF22  LLeefftt  V

Veelloo  but dedicated to the notes played with the right hand, namely the lead.

F4 Left Drum

:

When set as O

Onn, it is used to play two percussion sounds of the Drum section of the SD5 with the bass voices of the Accordion

and two more voices with the Accordion chords. The two voices with relative velocity values can be selected for chords and
bass. Using the D

DA

ATTA

A  C

CU

UR

RSSO

OR

R  ((U

Upp  aanndd  D

Doow

wnn)) push buttons, go to the voice and then select it using the D

DA

ATTA

A  C

CU

UR

RSSO

OR

R  ((LLeefftt  aanndd

R

Riigghhtt)) push buttons. Moving around again using the D

DA

ATTA

A  C

CU

UR

RSSO

OR

R  ((U

Upp  aanndd  D

Doow

wnn)) push buttons you can modify the velocity

value using the D

DA

ATTA

A  C

CU

UR

RSSO

OR

R  ((LLeefftt  aanndd  R

Riigghhtt)) push buttons. When a voice is to be completely excluded, set the velocity at 0.

Note:

It is advisable to use the Left Drum function when the Arranger is not in use.

F5 Autochord

:

This excludes the acknowledgement of the chords leaving the Accordion player free to play the bass and the chords manual-
ly, without any automation.

F6 Bas Sust

:

The value that can be modified using the D

DA

ATTA

A  C

CU

UR

RSSO

OR

R push buttons indicates the length of the Sustain on the manual bass,

when the M

MA

AN

NU

UA

ALL  B

BA

ASSSS push button is in use (LED lit).

F7 Bas To Ch

:

Set as On, it also includes the bass note in the acknowledgement of the chords, to create chords with varied bass using the
B

BA

ASSSS  TTO

O  LLO

OW

WEESSTT push button.

F8 Bas Octav

:

The value that can be modified using the DDAATTAA  CCU

URRSSO

ORR push buttons indicates the octave of the manual bass voice, with the M

MAAN

NU

UAALL

BBAASSSS push button enabled.

F9 Lower Oct

:

For each voice assigned to Lower 1 and Lower 2, its octave can be modified using the D

DA

ATTA

A  C

CU

UR

RSSO

OR

R push buttons and push

button FF99 to switch between the two parameters.

F10 Accordion Mode

:

This enables or disables the use of the parameters for the MIDI Accordion.

SAVING THE PARAMETERS FOR THE MIDI ACCORDION

Thanks to the Power On Set-up function, all the settings of the parameters described can be saved, which will be called up automatically when
the SD5 is turned on. To enable this procedure, press the SSA

AV

VEE push button and then select FF33  PPoow

weerr  O

Onn  SSeett--uupp. Press FF110

0  SSaavvee to

save the settings in Flash RAM. Further details on Power On Set-up are given in the dedicated section.

MIDI Accordions

Summary of Contents for SD5



























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands