manualshive.com logo in svg

KETRON SD5, Owner'S Manual

Share
Download
KETRON SD5 Owner'S Manual Download Page 57

SD5

55

R

ecording a Midi file

Everything that is played on the SD5, including the automatic accompaniment and the changes made on the control panel, can be recorded as
a Midi file directly to a Floppy Disk or Hard Disk. Everything recorded can later be modified using a sequencer software for PC/Mac. Considering
the fact that the accompaniment tracks use sounds in standard General MIDI, it is also possible to quickly create some arrangements which will
also be compatible with other GM modules. Some of the properties of the SD5 may however be lost if reproduced on GM modules, especially the
use of  the Live Drum tracks (Drum 2), the response to the modulation of the voices for the Right section of the keyboard that are not compa-
tible with the General MIDI Standard, and the use of the Drawbars.

To start recording a Midi file, press SONG PLAY push button. The Midi file will be
recorded on the disk that is currently selected and, if the hard disk is selected, in
the folder that was previously accessed.
The page called up is used to enter the name of the Midi file using the keyboard
keys and the D

DA

ATTA

A  C

CU

UR

RSSO

OR

R push buttons, to cancel the procedure using FF55  EEssccaappee

and to confirm the creation of the Midi file using FF110

0  SSaavvee. On this page, use the

PPA

AG

GEE  ++//-- push buttons to select the destination disk as well.

Once the Midi file has been created, the display will show the FF110

0  SSttaarrtt function. By

pressing the relative function push button, “R

Reeccoorrddiinngg” appears under the Tempo

bar and the recording of the Midi file starts, even with the Arranger disabled, thus
enabling all the basic settings to be recorded that will then go into the fist mea-
sure of the Midi file. The Tempo starts only if the Arranger is enabled.
Recording is not stopped by pressing the SSTTA

AR

RTT push button once again but only if both the D

DIISSK

K and SSO

ON

NG

G  PPLLA

AY

Y push buttons are pressed at

the same time. Once SSoonngg  R

Reeccoorrdd is disabled, the SD5 resets itself automatically, ready to playback everything recorded within the current ses-

sion in SSoonngg  PPllaayy.

Recording a Midi file

Summary of Contents for SD5



























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands