Kesseböhmer 873 330 904, Manual

Page: 34 / 56

34
Betrieb / Operation / Provoz / Praca
5.4.3 Changing the height display (cm/inch)
DMUI-HSU Handsets can display the height of the Table Top in both centimeters and inches. To
change the displayed unit of measurement:
f
Press and hold Memory Position Keys 1 and 2, alongside the UP Key
- The display shows S and a number, e.g. S 7.
f
Press the UP Key or DOWN Key until the display shows S 5.
- The display shows S 5.
f
Press the SAVE Key
- If the display was previously set to cm, it is now set to inches.
- If the display was previously set to inches, it is now set to cm.
5.4.4 Container stop and shelf stop positions.
f
Press the UP or DOWN button to move the tabletop to the desired position.
f
Press and hold the memory key for 10 seconds
- The shelf stop/container stop position is saved
5.4 Dodatečné funkce ručního spínače paměti
5.4.1 Uložit pozici v paměti
f
Pohybujte stolem do požadované výšky.
- Displej zobrazí výšku desky stolu.
f
Stiskněte tlačítko pro uložení.
f
Stiskněte paměťové tlačítko.
- Displej zobrazí „S 2“.
- Asi po dvou sekundách se opět objeví výška desky stolu.
Container stop positions can only be stored in the lower half of the movement
range. Shelf stop positions can only be saved in the upper half of the
movement area. Each new position must be set separately.
CAUTION