24
Betrieb / Operation / Provoz / Praca
5.1 Performing a Position Reset Procedure
Before using the LifeUP Pro System a Postion Reset Procedure must be carried out.
You do this as follows:
•
Press and hold the
DOWN Key
until the table stops at the lower position limit
•
Release the
DOWN Key
•
Press and hold the
DOWN Key
again
▸ The table will move down slightly, then up again
•
Release the
DOWN Key
▸ The Position Reset Procedure is complete
•
Risk of minor or moderate injury through crushing
Collision Detection (ISP) is inactive during start-up and reset processes. This
may lead to minor or moderate injury through crushing.
f
Ensure that no persons or objects are in the table‘s range of motion
WARNUNG
f
If your LifeUP Pro system has been parameterized with additional
stopping points (e.g. a Safety Area or Container Stop Position), repeat
Step 3 until the table has moved upwards again.
Notice
f
When in use for the first time, wait 10 seconds aer plugging in the Power
cord to reset the table. The green LED lights up quickly to show the table
can be resetted.
Notice
Summary of Contents for 873 330 904
Page 16: ...16 Montage Assembly Montáž Montaż 3 m i n 2 0 m m m a x 8 0 0 m m ø5 x 25 8x 1200mm 4 ...
Page 21: ...21 Montage Assembly Montáž Montaż 10 11 ø5 x 25 8x 12x ø5 x 60 optional volitelný opcjonalny ...
Page 22: ...22 Montage Assembly Montáž Montaż 4x 12 12 1x 4x ø4 x 16 1x ø4 x 16 ...
Page 55: ...55 Notizen Notes Poznámky Notatki 11 Notizen Notes Poznámky Notatki ...
