50
SUPERtrol-I LE Flow Computer
13.1 Response of ST1LE on Error or Alarm:
TYPE OF ERROR
DESCRIPTION
Sensor/Process Alarms
Errors detected due to
sensor failure or process alarm
conditions
Self Test Errors
Errors detected during self
test.
System Alarms
Errors detected due to system
failure
Error and warning indications which occur during operation are indicated
in the RUN mode alternately with the measured values. The ST1LE
Flow Computer has three types of error:
Some alarms are self clearing. Other alarms require the user to
acknowledge and clear the alarm. Press the ENTER button to
acknowledged and clear alarms. Alarms may reassert themselves if
the alarm condition is still present.
NOTE: A historical error alarm log is available in the "Test Mode".
The following descriptions suggest possible causes and corrective
actions for each alarm message.
13. Diagnosis and Troubleshooting
