16
SUPERtrol-I LE Flow Computer
6. PROGRAMMING
6.1 Front Panel Operation Concept for Program Mode
The ST1LE is fully programmable through the front panel. Please review the following usage sum-
mary before attempting to use the instrument.
Setup Mode:
MODE CHANGES
Pressing the MENU key will offer selections of RUN, SETUP, TEST. RUN is the normal operating
mode for the instrument. SETUP offers various sub-menus used for instrument setup. TEST
offers various sub-menus for Test, Calibration and System Start-up testing.
Sub-menu GROUP NAVIGATION
Use the UP and DOWN arrow keys to navigate up and down through the Sub-Menu groups when
in the SETUP or TEST mode. Press the ENTER key to enter a desired setup or test Sub-Menu
group.
SELECTION OF ITEM
During setup, the unit will often offer multiple choices for a given topic. The topic prompt appears
on the top line of the display. The choices are shown on the lower line of the display.
To select an item, press the key (in top row) beneath the desired choice. The selected
choice will blink. Press the ENTER key to accept the selected choice.
NUMERIC ENTRY
The keys labeled "0 - 9", "–", ".", CLEAR and ENTER are used to enter numerical values. A
leading 0 will assume that you intend to enter a minus "–" sign. Press the CLEAR key to clear
the existing value and to enable editing. Enter the digits of your desired values, press ENTER to
accept the value.
TEXT CHARACTER ENTRY
Some setup items (i.e. Descriptors, Units Label) require the user to enter text characters. Press
CLEAR to enable editing. The UP and DOWN arrow keys are used to scroll through the available
character sets for each individual character. Press the ENTER key to accept the character and
advance to the next character.
STOP
START
5
0
–
CLEAR
•
MENU
ENTER
HELP
4
PRE 1
3
RATE
2
TOTAL
1
GRAND
6
SCROLL
7
PRE 2
8
9
F4
F1
F2
F3
