24
SUPERtrol-I LE Flow Computer
SETUP PULSE OUTPUT
PULSE OUTPUT USAGE
Off Volume
PULSE WIDTH
10mS 100mS
PULSE VALUE
1000 gal/P
Advance To
SETUP ANALOG OUTPUT
6.4.7
SETUP
PULSE OUTPUT
Press ENTER at this prompt to setup the Pulse Output.
Select the desired Pulse Output Usage.
Select the desired Pulse Width for the Pulse Output.
Enter the desired Pulse Value for the Pulse Output
(Volume Units per Pulse).
6.4.8
SETUP
ANALOG OUTPUT
Press ENTER when Analog is flashing to setup the
Analog Output.
Select the desired Analog Output Usage.
Select the desired current range for the Analog Output.
Enter desired Analog Output Low Scale Value.
NOTE: Units label will correspond with output usage
type selected.
Enter desired Analog Output Full Scale Value.
Enter the desired Analog Output Damping Constant. See
Definitions for additional information.
SETUP ANALOG OUTPUT
ANALOG OUTPUT USAGE
Rate Total
ANALOG OUTPUT RANGE
4-20mA 0-20mA
LS ANALOG OUTPUT
0.0 gal/m
FS ANALOG OUT 20mA
1000.0 gal/m
ANALOG OUT DAMPING
0.0
Advance To
SETUP RELAYS
Notes
Display
Sub-menus
