Kenwood TS-990S, Instruction Manual

Page: 217 / 290

14-5
VOICE GUIDANCE 14
Index Contents
Screen Operation/Status Announced Content
The audio source to be
transmitted
When the screen opens or
[VOICE1] is pressed
"Modulation source" + (Microphone PTT/Data PTT)
Changing the transmit method (Microphone PTT/Data PTT)
Switching the audio source (Microphone/ACC2/USB/Optical)
Switching On/Off (On/Off)
When to reset to the defaults No announcement
Toggling the Data VOX between
On and Off
"Data box" + (Off/ACC2/USB/Optical)
VOX level configuration
When the screen opens or
[VOICE1] is pressed
(VOX gain/Anti-VOX gain/VOX ready)
+ (Microphone/ACC2/USB/Optical) + Value
Switching the audio source (Microphone/ACC2/USB/Optical)
Switching a parameter to be
configured
(VOX gain/Anti-VOX gain/VOX ready)
Increasing/decreasing
configuration value
Value (No voice guidance for MIC VOX value)
Reset to the defaults No announcement
Transmit power limit
When the screen opens or
[VOICE1] is pressed
(TX power limit/TX power limit data/TX tune)
+ (1.8/3.5/5/7/10/14/18/21/24/28/50) + "MHz" + Value
Selecting transmit power type (TX power limit/TX power limit data/TX tune)
Selecting band (1.8/3.5/5/7/10/14/18/21/24/28/50) + "MHz"
Increasing/decreasing transmit
power
Value
Reset to the defaults No announcement
Speech processor effect
type
When the screen opens or
[VOICE1] is pressed
"Processor" + (Soft/Hard)
Selecting an effect (Soft/Hard)
Transmit filter
When the screen opens or
[VOICE1] is pressed
"TX" + "Filter" + (A/B/C) + (High/Low) + Value
Transmit filter switch operation (A/B/C)
HICUT/LOCUT switching
operation
(High/Low)
Switching the cutoff frequency Value
Reset to the defaults No announcement
CW Message
(Paddle version)
When the screen opens or
[VOICE1] is pressed
"CW" + "Message"
When the editing screen opens
or [VOICE1] is pressed
"Channel" + "Repeat" + "Blank"
Switching a repeat "Repeat" + (On/Off)
Switching a channel Number
Switching a playback list No announcement
Delete No announcement
Editing a channel name
(Including when [VOICE1] is
pressed)
"Edit"
CW Message (Paddle)
save pending
When the screen opens or
[VOICE1] is pressed
No announcement
Save a CW Message When [VOICE1] is pressed No announcement
CW Message
(Text version)
When the screen opens or
[VOICE1] is pressed
"CW" + "Message"
When the screen opens or
[VOICE1] is pressed
"Channel" + "Repeat" + "Blank" + (Number/Contest number)
Switching a repeat "Repeat" + (On/Off)
Switching a channel Number
Switching a playback list No announcement
Delete No announcement
Subtracting the contest number Contest number
Editing a channel name
(Including when [VOICE1] is
pressed)
"Edit"
RTTY
When the screen opens or
[VOICE1] is pressed
"RTTY" + "Communication"
PSK
When the screen opens or
[VOICE1] is pressed
"PSK" + "Communication"