Kenwood TS-990S, Instruction Manual

Page: 214 / 290

14-2
14 VOICE GUIDANCE
Index Contents
AUTOMATICALLY ANNOUNCING VOICE GUIDANCE
When voice guidance is enabled, voice guidance is
announced automatically upon the certain operation.
1 Select Group No. 1, "Audio Performance", from the
Menu screen.
2 Access Menu 06, "Automatic Voice Guidance".
3 Press [SELECT] (F4) to enable editing of the
parameter box.
4 Press [–] (F4) or [+] (F5) to select "On".
The default is "Off".
5 Press [ ] (F1).
6 Press [MENU] to exit.
Note:
◆ Press [ ] while pressing down [PF A] when the transceiver power
( ) turns OFF starts up the transceiver power ( ) with Voice
Guidance enabled.
If auto voice guidance is enabled, announcement is made
as follows.
Transceiver
Behavior
Key Operation Announcement
Power ( ) ON
-
Operating data is announced
regardless of the status of the
configuration screen. Refer to
"Voice 1".
Toggling between
VFO mode and
Memory Channel
mode
[M/V] Refer to "Voice 1".
Memory shift
[M V]
[M VFO] (F)
Announces the content in VFO
mode. Refer to "Voice 1".
Switching to Quick
Memory Channel
mode
[MR]
Announces the content of Quick
Memory Channel mode. Refer to
"Voice 1".
Switching Memory
Channels in
Single-band
Memory mode
Rotate the
MULTI/CH
control.
"Channel" + (S/D/P/
blank) + Frequency
No announcement if the Memory
Channel List screen is open.
Switching Memory
Channels in Dual-
band Memory
mode
Rotate the
MULTI/CH
control.
("Split") + (RX/TX) + "Channel"
+ (S/D/P/blank) +
frequency
No announcement if the Memory
Channel List screen is open.
When frequency
is entered with the
numeric keypad
[ENT] "Enter"
Channel number
is entered with the
numeric key
Pressing the
numeric key
Number
Switching
frequency entry
history
Rotate the
MULTI/CH
control.
Frequency
Switching
frequency lock
[LOCK] (M)
[LOCK] (S)
"Lock" + (On/Off)
Switching mute
function for
received audio
[MUTE] (M)
[MUTE] (S)
"Mute" + (On/Off)
Switching split
operation
[TX] (S)
[TX] (M)
"Split" + (On/Off)
Transceiver
Behavior
Key Operation Announcement
Entering split
frequency
Press and hold
[TX] (S)
"Split" + "Enter"
Confirming split
frequency
The numeric
keypad or [TX]
(S)
"Split" + "TX " + Sub band
frequency
Changing the Low
Cut frequency
Rotate the LO/
WIDTH control "Low" + frequency
Changing width
Rotate the LO/
WIDTH control
"Width" + frequency
Changing the High
Cut frequency
Rotate the HI/
SHIFT control "High" + frequency
Changing shift
frequency
Rotate the HI/
SHIFT control "Shift" + frequency
Changing transmit
power
Rotate the PWR
control
"TX power" + number
Enabling or
disabling the timed
task by a timer
[TIMER] "Timer" + (On/Off)
Switching dimmer [DIM] "D" + 1 digit number
Switching antenna [ANT] (F) "Antenna" + number
Selecting band
direct
Band direct key Frequency
Using the
emergency contact
configuration
frequency
[EMERGENCY]
(PF)
"Emergency" + "Frequency"
Switching meter [METER] (F)
Analog: (Power/SWR/ID/
Processor/ALC/VD)
"Processor" is announced only if
Processor is enabled.
Digital: (SWR/ID/Processor/VD/
TMP)
"Processor" is announced only if
Processor is enabled.
Mini-digital: (Power/SWR/ID/
Processor/ALC/VD/TMP)
"Processor" is announced only if
Processor is enabled.
Note:
◆ Refer to "Voice 1" for the announcement contents currently
displaying the configuration mode. {page 14-3}