Kenwood TS-990S, Instruction Manual

Page: 202 / 290

12 ABOUT THE USB FLASH DRIVE
12-4
Index Contents
CHANGING A FILE NAME IN THE USB FLASH
DRIVE
You can change the names of the data files, such as
configuration data files, RX DSP equalizer data files, TX
DSP equalizer data files, etc., saved in a USB flash drive.
[MULTI/CH]
[ESC]
[MENU]
[F1]~[F7] [USB]
F[USB DRIVE]
[TXEQ/SEL]
[RXEQ/SEL]
Prepare a USB flash drive where the files to be renamed
are stored, and then follow the procedure below to
rename.
1 Insert a USB flash drive to the
(USB-A) connector.
" " blinks on the main screen, and " " lights when the
transceiver recognizes the USB flash drive.
2 Open the corresponding screen to the file type.
• Configuration Data: Press [USB DRIVE] (F) on the Menu
screen, select "Read Configuration Data", then press
[SELECT] (F3).
• RX DSP Equalizer: Press [READ] (F6) in the RX Equalizer
screen.
• TX DSP Equalizer: Press [READ] (F6) in the TX Equalizer
screen.
• File names stored in a USB flash drive appear.
3 Press [ ] (F2) or [ ] (F3) to select a file.
4 Press [NAME] (F) to allow file name to be changed.
5 Use the functions keys and the MULTI/CH control to
edit or enter a text string for the file name.
A maximum of 255 alphanumeric characters and symbols
can be entered.
[SPACE] (F1): Press to enter a space.
[-] (F2) and [+] (F3): Press to display the previous or next
character.
[
] (F4) and [ ] (F5): Press to move a pointer
to the left or right.
[SAVE] (F6): Press to store the selected characters.
[BACK SPACE] (F): Press to delete the character to the left
of the cursor.
[DEL] (F): Press to delete the character to the right of the
cursor.
[CHAR] (F): Press to change the character type. Each time
you press [CHAR]] (F), the characters cycle through the
following sequence:
ABC (upper case) > abc (lower case) > ÀÁÂ (upper case) >
àáâ (lower case) > !”# (symbols) > ABC (upper case)
6 Press [SAVE] (F6) to save a file.
Pressing [CANCEL] (F7) clears the entered parameter and
reverts to the USB screen.