Kenwood TS-990S, Instruction Manual

Page: 33 / 290

PANEL DESCRIPTION 2
2-7
Index Contents
REV
Memory keys
[M/V] key
Press to toggle between Memory Channel mode and VFO
mode. {page 10-4}
Press and hold to switch between Dual Memory Channel
mode and VFO mode. {page 10-4}
[M.IN] key
Press to open the Memory Channel List
screen. {page 10-7}
[M▶V] key
The operating mode configured for the Memory Channel will
be copied to the VFO. {page 10-6}
Recorder keys
[REC] key
Press to start normal recording. Press while recording to
pause the recording. {page 13-4} {page 13-5}
Press and hold to start constant recording. Depending on the
configuration, the constant recorder function will retain the
last 30 seconds audio. {page 13-6}
"REC" LED
Lights red while recording.
[STOP] key
Press to stop recording or playback.
[PLAY] key
Press to play back the latest audio file recorded. Press this
key during playback to pause. {page 13-6} {page 13-2}
[S.DISP/SEL] key
Press to change the display contents for the sub
screen. {page 4-4}
Press and hold to switch between the standard display mode
and the expanded display mode. {page 4-4}
Quick Memory keys
[MR] key
Press to toggle the Quick Memory mode between active and
inactive. {page 10-8}
Press and hold to clear all the operating data stored in Quick
Memory Channels. {page 10-9}
[M.IN] key
Press to save data in Quick Memory Channels.
{page 10-8}
[MENU] key
Press to open the Menu screen. Press again while the Menu
screen is open to close the Menu screen. {page 3-1}
DSP Equalizer keys
[RXEQ/SEL] key
Press to toggle the RX DSP equalizer between active and
inactive. {page 5-6}
Press and hold to open or close the RX Equalizer
screen. {page 5-6}
[TXEQ/SEL] key
Press to toggle the TX DSP equalizer between active and
inactive. {page 9-9}
Press and hold to open or close the TX Equalizer
screen. {page 9-10}
Programmable Function B key: [PF B]
Press to activate the function assigned to [PF B]. The default
is "VOICE 3". {page 14-10}
HI/SHIFT LO/WIDTH controls
HI/SHIFT control
High Cut/Low Cut mode: Rotate to adjust the high cut
frequency. {page 6-4}
Shift/Width Mode: Rotate to adjust the shift
frequency. {page 6-5}