Kenwood TS-990S, Instruction Manual

Page: 252 / 290

16 USEFUL FUNCTIONS
16-20
Index Contents
CONFIGURING THE I/O SIGNALS FOR THE ACC
2 CONNECTOR
If you connect an external device to the ACC 2 connector
on the rear panel, you can configure the audio signal input
level.
CONFIGURING THE INPUT AUDIO LEVEL
You can configure the audio signal input level from the
ACC 2 connector on the rear panel.
1 Select Group No. 7, "Rear Connectors", from the Menu
screen.
2 Access Menu 06, "ACC 2: Audio Input Level".
3 Press [SELECT] (F4) to allow editing of the parameter
box.
4 Press [-] (F4) and [+] (F5), or rotate MULTI/CH control
to select the input level from the available range
between "0" and "100".
The default is "50".
5 Press [ ] (F1).
6 Press [MENU] to exit.
CONFIGURING THE OUTPUT AUDIO LEVEL
If you connect an external device to the ACC 2
connector on the rear panel, you can configure the audio
signal output levels of the main band and sub band
independently.
1 Select Group No. 7, "Rear Connectors", from the Menu
screen.
2 Access Menu 10, "ACC 2: Audio Output Level (Main
Band)" or Menu 11, "ACC 2: Audio Output Level (Sub
Band)".
3 Press [SELECT] (F4) to allow editing of the parameter
box.
4 Press [-] (F4) and [+] (F5), or rotate the MULTI/CH
control to select the audio signal output level for the
main band from the available range between "0" and
"100".
The default is "50".
5 Press [ ] (F1).
6 Press [MENU] to exit.