Kenwood TS-990S, Instruction Manual

Page: 123 / 290

5-45
ASSISTING YOUR SMOOTH QSO 5
Index Contents
DISPLAYING THE TIME STAMP
You can display the timestamp whenever transmission and
reception alternate. You can display frequency information
as well as the timestamp.
[F1]~[F7]
[MENU] [MULTI/CH]
1 Select Group No. 2, "Decoding & Encoding", from the
Menu screen.
2 Access Menu 13, "RTTY/PSK Time Stamp".
3 Press [SELECT] (F4) to allow editing of the parameter
box.
4 Press [-] (F4) and [+] (F5) to select "Off" (do not
display), "Time Stamp" (display the time only), or "Time
Stamp + Frequency" (display the time and frequency).
The default is "Time Stamp + Frequency".
5 Press [ ] (F1).
6 Press [MENU] to exit.
SELECTING THE TIMESTAMP TIME
You can select whether the time configured for the Local
Clock or the Secondary Clock is applied to the time
displayed for the timestamp.
[F1]~[F7]
[MENU] [MULTI/CH]
1 Select Group No. 2, "Decoding & Encoding", from the
Menu screen.
2 Access Menu 14, "Clock (RTTY/PSK Time Stamp)".
3 Press [SELECT] (F4) to allow editing of the parameter
box.
4 Press [-] (F4) and [+] (F5) to select"Local Clock" (use
the local clock for time stamp) or "Secondary Clock"
(use the secondary clock for time stamp).
The default is "Local Clock".
5 Press [ ] (F1).
6 Press [MENU] to exit.