NX-200
17
3. Precautions for Reassembly
■
Installing the option board cover onto the chassis
1. Install the option board cover onto the chassis using the
two screws.
Note:
Confi rm that there is no foreign matters on the water-
proof rib of the option board cover. (Wipe it clean when
foreign matters adhere to it.)
2. Perform the water resistance confi rmation and then ap-
ply the bond to the two left side screws, tightened in the
rear of the transceiver. (Refer to pages 23 to 30.)
■
Inserting the Volume and Channel j50 into the
chassis
Insert the volume and channel switch into the chassis
with the VOL/CH FPC formed as shown in the fi gure.
VOL/CH FPC
Volume /
音量
Channel switch
信道开关
DISASSEMBLY FOR REPAIR /
维修拆卸
3. 重新组装注意事项
■将可选板盖安装到底座
1. 用两颗螺丝将可选板盖安装到底座上。
注意 :
确认可选板盖的防水肋片上没有异物。( 如有附着的异物,
应将其擦干净。)
2. 进行防水性能确认,然后在手持对讲机后面拧紧的两颗左
侧螺丝上涂上粘合剂。( 请参阅第 23 至 30 页。)
■将音量和信道开关插入底座
将音量和信道开关插入底座,使 VOL/CH FPC 的形状如图所
示。