7
Troubleshooting Guide
Problem
Cause Solution
Handmixer does not
operate.
No power.
Check appliance is plugged in.
Kneader with plastic
gear cannot be inserted
into the socket.
Fitting kneader to
wrong socket
The kneader with the collar will only
fit into the
socket.
Handmixer starts to
slow or labour during
processing.
Speed selected too low. Increase speed.
Recommended quantity
exceeded.
Refer to Recommended Usage
Chart for speeds and quantities to
process.
Do not operate for longer than 3
minutes without a 15 minute rest
period with doughs or heavy cake
mixes.
Excessive splashing
or flour spray during
processing.
Speed selected too
high.
Select a lower speed initially and
increase as the mixture thickens.
Bowl too shallow or too
small for ingredients
being processed.
Select an appropriate sized mixing
bowl.
Unable to remove
tools from sockets.
Speed selector not in
'O' position .
To remove the tools, make sure the
speed selector is in the OFF “O”
position and unplug the handmixer.
Press the Tool SureEject™.
Pulse does not
operate
The motor will only
operate for as long as
the control is held in
position.
Slide the speed selector to the (P)
position to use in short bursts at
maximum speed.
Summary of Contents for HMP54
Page 3: ...1 2 3 4 5 6 7 8 13 9 10 11 12 ...
Page 4: ...A D G B C E F H I ...
Page 5: ...K J ...
Page 149: ......
