Kenwood DNX4150BT, Quick Start Manual

Page: 116 / 211

83
Return to the Top page
Bluetooth Control
Registering the Bluetooth Unit
Preparation
• You cannot register the Bluetooth unit when you
are using the following sources:
iPod, Bluetooth Audio, APPS, iHeart, Pandora,
AUPEO!
If you want to register the Bluetooth unit while
using one of the above mentioned sources, send
the connection request from the Bluetooth unit
and register it.
1
Press the <HOME> button.
HOME screen appears.
2
Touch [STANDBY].
3
Press the <MENU> button/
volume knob.
Popup menu appears.
4
Touch [SETUP].
SETUP Menu screen appears.
5
Touch [Bluetooth].
Bluetooth SETUP screen appears.
6
Touch [Search].
Searched Device List screen appears.
NOTE
• A new device cannot be registered if there are 5
registered Bluetooth units. Delete unnecessary
registration. See
Connecting the Bluetooth unit
(P.84)
.
• This unit is compatible with the Apple Easy
Pairing function. When an iPod touch or iPhone is
connected to this unit, an authentication dialog
appears. Performing operation for authentication
on this unit or iOS smartphone registers the
smartphone as a Bluetooth device.
• If two Bluetooth units are connected, this unit will
not start the search. In this case disconnect one
of the Bluetooth units.
7
Select the Bluetooth unit to register
from the list.
NOTE
• If the unit cannot be searched in step 1, you can
search the unit again by touching [Search] in
above screen.
• Touch [Cancel] to cancel searching for the
Bluetooth unit.
8
Enter PIN code form the cell-phone.