Kenwood BL760 Series, Manual

Page: 5 / 113

to use your mill
(if supplied)
1 Put your ingredients into the jar.
(Refer to the mill recommended
usage chart).
2 Fit the sealing ring into the mill
blade unit marked – ensuring the
seal is located correctly in the
grooved area.
●
Ensure that the seal is fitted
correctly.
3 Then clip the blade unit into the
mill base .
4 Turn the mill blade assembly upside
down. Lower it into the jar, blades
down. Turn in a clockwise direction
to lock.
5 Place the mill onto the power unit.
6 Select a speed or use the pulse
control. (Refer to the mill
recommended usage chart).
7 After milling, you can replace the
blade assembly with the mill lid.
hints
●
For optimum performance when
processing spices we recommend
that you do not process more than
50g at a time in the mill.
●
Whole spices retain their flavour for a
much longer time than ground
spices so it is best to grind a small
quantity fresh at a time to retain the
flavour.
●
To release the maximum flavour and
essential oils whole spices are best
roasted prior to milling.
●
Herbs are best chopped when clean
and dry.
5
Ingredients Max Qty Speed Operating time
Nuts 50g 5 10 seconds
Coffee Beans 50g 5 30 seconds
Uncooked Meat 100g Pulse 5 seconds
Beef Steak - cut into 2
1
⁄
2
cm cubes
Herbs 10g 5 5 seconds
Baby Food & Fruit Purees 100g 30 seconds
Spices -
black peppercorns,
50g 5 30-60 seconds
cardamom seeds, cumin seeds,
coriander seeds, fennel seeds and
whole cloves
mill recommended usage chart
care and cleaning
●
Always switch off, unplug and
dismantle before cleaning.
●
Empty the goblet before unscrewing
it from the blade unit.
●
Don’t immerse the blade unit
in water.
●
The blender goblet and mill jar can
be washed in your dishwasher.
power unit
●
Wipe with a damp cloth, then dry.
●
Don’t immerse the power unit in
water.
●
Store excess cord in the storage
area at the back of the power
unit
.
blade assembly
1 Unscrew the blender or mill base
from the goblet. Then remove the
blade unit by pushing up from
underneath.
●
Care should be taken when
removing the blade unit from
the blender or mill base.