Kenmore 795.6900 Series, Service Manual

Page: 12 / 62

screwdriver and remove.
Fig. 29
Using 10mm or 13/32-inch socket wrench, remove
the 3 bolts and lift off the Top Hinge. Set parts aside.
Fig. 18 Fig. 30
3-7-3 REVERSE DRAWER
REFRIGERATOR DOOR
Gently pry off Top Hinge Cover with a flat head.
- 12 -
Lift up refrigerator door slightly and remove it.
Hinge Pin
Fig. 31
Fig. 32
Remove Hinge Pin Insert on the right side of the
door and reinstall on left side.
Hinge Pin
Insert
Fig. 34
Turn refrigerator door upside down on a non-scratch
surface.
Remove screw on the opposite side of the door.
Fig. 33
Hinge Pin
Insert
Hinge Pin
Insert Bracket
Move the Hinge Pin Insert Bracket to the other side
of the door, keeping the same orientation, and push
the Hinge Pin Insert into the hole on the left side of
the bracket. Insert the 2 screws as shown below.
This screw is no longer necessary and can be
discarted.
uncover screw holes and place it on the right side.
Fig. 35
Loosen the 2 screws to remove the Bottom Hinge
Pin Insert Bracket with Hinge Pin Insert.