Kenmore 795.6900 Series, Service Manual

Page: 41 / 62

ERROR CODE on display panel
NO ITEM
ERROR CODE
CONTENTS REMARKS
1
2
3
4
5
Failure of freezer
sensor
Failure of
refrigerator sensor
Failure of defrost
sensor
Failure of defrost
mode
If there is no fan motor
signal for more than 115sec
in operation fan motor
Snapping of defrost heater
or temperature fuse, pull-
out of connector (indicated
minimum 2 hours after
failure occurs)
Er
Er
Er
Er
Er
FS
rS
dS
dH
FF
Failure of BLDC
fan motor at
freezing
compartment.
Cut or short circuit wire
Cut or short circuit wire
Cut or short circuit wire
1 2
8-1-10 Defect Diagnosis Function
1. Automatic diagnosis makes servicing the refrigerator easy.
2. When a defect occurs, the buttons will not operate; but the tones. such as ding. will sound.
3. When the defect CODE removes the sign, it returns to normal operation (RESET).
4. The defect CODE shows on the Refrigerator and Freezer Display.
When defrost sensor
does not reach 8°C within
1 hour after starting
defrost.
Inspect Connecting wires
on each sensor
*LED check function: If simultaneously pressing the Cold key of refrigerator Temp and the Cold key of freezer temperature
for a second, all display LED graphics on. If releasing the button, the LED graphics displays the previous status.
- 41 -
Poor motor, hooking to
wires of fan, contact of
structures to fan, snapping
or short circuit of Lead
wires.