•
•
Use an adjustable wrench to remove the 2 handle
mounting screws.
Screws
mounted
on door
To avoid scratching the door. Do not remove the
plug buttons by prying with a screwdriver.
C
A
U
T
I
O
N
Fig. 102
Plug button
Unscrew the buttons with your fingers by rotating
counterclockwise; they will loosen and fall free.
Fig. 103
Plug buttons
Install the plug buttons on the left side.
•
Fig. 104
•
Install the handle mounting screws on the
right side.
Handle Mounting
screws
Fig. 105
Screws
Keyhole slots
mounted
on back of
on door
handle
Fig. 106
Align the keyhole slots on the door handle to the
handle mounting screws on the door and
grasping the handle with both hands, press it
firmly against the front of the door and slide the
handle down. This may require some force.
- 23 -
3-8-4 HOW TO REVERSE SWING
DOOR HANDLE
Grasp the handle tightly with both hands and slide the
handle up (this may require some force).
The keyhole slots on the back of the handle allow
the handle to separate from the mounting screws.
Key hole
slots on
back
of handle
Screws
mounted
on door
Fig. 101
tape
NOTE
: To assist in installing the handle on the right
side, place a small piece of masking tape near the
top of the handle before removing.
Summary of Contents for 795.6900 Series
