Hinge Pin
Fig. 79
Fig. 80
Hinge Pin
Insert
Lift up refrigerator door slightly and remove it.
- 19 -
Remove Hinge Pin Insert on the right side of the
door and reinstall on left side of door.
3-8-3 REVERSE SWING REFRIGERATOR
AND FREEZER DOORS
screwdriver and remove.
Fig. 77
Using 10mm or 13/32-inch socket wrench, remove
the 3 bolts and lift off the Top Hinge. Set parts aside.
Fig. 18
Fig. 78
Move the Hinge Pin Insert Bracket to the other side
of the door, keeping the same orientation, and push
the Hinge Pin Insert into the hole on the left side of
the bracket. Insert the 2 screws as shown below.
Fig. 83
uncover screw holes and place ir on the right side.
Fig. 82
Turn refrigerator door upside down on a non-scratch
surface.
Remove the screw on the opposite side of the door.
Fig. 81
Hinge Pin
Insert
Hinge Pin
Insert Bracket
This screw is no longer necessary and can be
discarted.
Loosen the 2 screws to remove the Bottom Hinge
Pin Insert Bracket with Hinge Pin Insert.
Summary of Contents for 795.6900 Series
