manualshive.com logo in svg

Kenmore 795.6900 Series, Service Manual

The Kenmore 795.6900 Series Service Manual is a vital resource for anyone seeking to troubleshoot and repair their appliance. This comprehensive manual provides step-by-step instructions and diagrams, allowing users to easily identify and resolve issues. Download the free manual from manualshive.com and regain control over your Kenmore product.

Share
Download
background image

1. SPECIFICATIONS

- 4 -

1-1. DISCONNECT POWER CORD BEFORE SERVICING 
      

 IMPORTANT: 

Reconnect all grounding devices.

1-2. IMPORTANT NOTICE

1-3. 

All parts of this appliance capable of conducting electrical current are grounded. If grounding wires, screws, straps, clips, nuts 
or washers used to complete a path to ground are removed for service, they must be returned to their original position and 
properly fastened.

This information is intended for use by individuals possessing adequate background of electrical, electronic and mechanical 
experience.
Any attempt to repair a major appliance may result in personal injury and property damage. The manufacturer or seller cannot 
be responsible for the interpretation of this information, nor can it assume any liability in connection with its use.

ELECTRICAL SPECIFICATIONS

Freezer temperature control (Middle setting)
Defrost Control ..............................................................................................................
Defrost Thermostat .......................................................................................................
Electrical Rating : 115VAC, 60Hz...................................................................................
Maximum Current Leakage ...........................................................................................
Maximum Ground Path Resistance ..............................................................................
Energy Consumption......................................................................................................

1-4. NO LOAD PERFORMANCE 

Control Position: MID/MID

.................................................................-6°F to +8°F

Automatic
46.4°F
1-5 A
0.5mA
0.14 Ohms
454kWh/yr (Energy Star)

And Ambient of:

Fresh Food, °F........................................................
Frozen Foor, °F........................................................
Percent Running Time ..............................................

1-5. REFRIGERATION SYSTEM

Minimum Compressor Capacity Vaccum............................. 
Minimun Equalized Pressure

@70°F..............................................................
@90°F..............................................................

Refrigerant  R134a............................................................
Compressor...............................................................

            70°F

33°F to 41°F

-4°F to +4°F

25% - 35%

21 in

49 PSIG
56 PSIG

4.2 oz

740 BTU/hr

Fresh Food, °F......................................................
Frozen Foor, °F.....................................................
Percent Running Time ...........................................

1-6. INSTALLATION 

At Top.................................................................................
At Sides..............................................................................
At Rear...............................................................................

Clearance must be provided at top, sides and rear of the 
refrigerator for air circulation.

            90°F

33°F to 41°F

-4°F to +4°F

45% - 60%

2 in
2 in
2 in

Summary of Contents for 795.6900 Series































































Reviews:

No comments

Related manuals for 795.6900 Series

Gamko GB Series User Manual preview
GB Series
Brand: Gamko Pages: 88
AYA ART0802A+ Instructions For Use Manual preview
ART0802A+
Brand: AYA Pages: 41
Cylinda KF2385NHE User Manual preview
KF2385NHE
Brand: Cylinda Pages: 86
Insignia NS-UZ17SS0 User Manual preview
NS-UZ17SS0
Brand: Insignia Pages: 19
Bartscher 700 GN211 Manual preview
700 GN211
Brand: Bartscher Pages: 28
HAEGER North Pole 220 User Instructions preview
North Pole 220
Brand: HAEGER Pages: 68
U-Line U-1224FZRINT-00A User Manual & Service Manual preview
U-1224FZRINT-00A
Brand: U-Line Pages: 53
Jenn-Air JRTDE22 Use And Care Manual preview
JRTDE22
Brand: Jenn-Air Pages: 23
Waeco CoolMatic CRX50 Operating Manual preview
CoolMatic CRX50
Brand: Waeco Pages: 33
Freggia LBF336 User Manual preview
LBF336
Brand: Freggia Pages: 32
True TBC-24-R/L-OG-A Installation Manual preview
TBC-24-R/L-OG-A
Brand: True Pages: 60
Bauknecht KRA 175 OPTIMA Instructions For Use Manual preview
KRA 175 OPTIMA
Brand: Bauknecht Pages: 14
Omcan RS-CN-0360 Instruction Manual preview
RS-CN-0360
Brand: Omcan Pages: 16
EAS Electric EMC2010SW1 Instruction Manual preview
EMC2010SW1
Brand: EAS Electric Pages: 90
Panasonic NR-BN211GKMY Service Manual preview
NR-BN211GKMY
Brand: Panasonic Pages: 26
Indesit 1230 Manual preview
1230
Brand: Indesit Pages: 32
Electrolux EI23BC60KS1 Use And Care Manual preview
EI23BC60KS1
Brand: Electrolux Pages: 34
Electrolux EI23BC56IB7 Installation Instructions preview
EI23BC56IB7
Brand: Electrolux Pages: 3

Brands by name

Popular brands

Load more brands