X8 MIG WELDER
2.3 Installation
1
2
1
2
Proceed as follows:
1.
Install the welding gun holder mount to the wire feeder with 2 screws going to the corresponding holes
on the wire feeder upper cover hinge.
2.
Attach the welding gun holder to the mount with 2 screws.
2.3.3.3 Replacing feed rolls
Replace the feed rolls when the material and diameter of the filler wire changes.
Proceed as follows:
1.
Open the top cover and lift the pressure handle.
OPERATING MANUAL | EN
37
©
KEMPPI | 2018-09-28
