X8 MIG WELDER
2.4 Operation
After you mark the pass complete, Control Pad shows the average heat input and travel speed values
and indicates whether they are within the WPS limits. You can use this feedback to adjust the parameters
or welding technique. The device also sends the data to the WeldEye cloud service for documentation.
Control Pad displays the number of completed passes with a round green checkmark next to it.
Enable heat input tracking in the WeldEye cloud service.
Digital work order
Note:
This function is available only if the device includes WeldEye for Welding Quality
Management and the function is enabled in WeldEye settings.
Select digital work orders with Control Pad before welding. After this, all welding data is associated with the
particular work order, and it is also visible in WeldEye.
OPERATING MANUAL | EN
160
©
KEMPPI | 2018-09-28
