X8 MIG WELDER
2.4 Operation
4.
To change the pass selection, scroll to a pass in a list.
5.
Press the green button to select the pass and to return to the WPS View.
Note:
You can also select the WPS or pass in the
Channel
view. See
Selecting WPS or pass in Channel
view
on page 143.
Selecting WPS or pass in Channel view
Proceed as follows:
1.
Go to
Channel
view.
Channel
displays the memory channel or WPS and the pass you are currently using.
OPERATING MANUAL | EN
143
©
KEMPPI | 2018-09-28
