X8 MIG WELDER
2.4 Operation
Selecting memory channel
You can select a memory channel through Control Pad, wire feeder display or gun remote control.
Proceed as follows:
1.
To select a memory channel through Control Pad or wire feeder display:
a) Press the
Channel
button.
b) Scroll with the right knob to a memory channel.
The selection activates immediately.
2.
To select a memory channel through the gun remote control, see
Gun remote control
on page 99.
Saving modified memory channel settings
Proceed as follows:
1.
To save modified settings in Control Pad or on the wire feeder display over the current settings of a
memory channel:
a) In the
Welding
view, press and hold the
Channel
button.
OR
2.
To save modified settings in Control Pad over the current settings of a memory channel:
a) Press
Channel
.
b) Open
Actions
.
c) Select
Save changes
and press the green button.
3.
To save modified settings in Control Pad on a different memory channel:
a) Press
Channel
.
b) Open
Actions
.
c) Select
Save to
and press the green button.
OPERATING MANUAL | EN
111
©
KEMPPI | 2018-09-28
