15
EN
Operating instructions CellaCast PX 8x
The activated laser pilot light can influence the measured temperature�
This influence will vary, depending on the instrument model and the
temperature�
To protect the laser against overload, an over temperature is provided� At temper-
atures above 60 °C, the laser switches of an can no longer be activated� To check,
whether the laser is activated, the parameter LED lights up�
In normal operation, the laser is switch off� After activation, the laser switch of
again after 2 – 15 minutes� The operator must be familiar with the pyrometer and
above safety guidelines�
If focusing is not possible during installation, focusing can also be done
outside the plant� To do this, set the pyrometer to the same distance as the
distance between the pyrometer and the pouring stream�
Summary of Contents for CellaCast PX 80
Page 1: ...Pyrometer CellaCast PX 8x Ident Nr 1108088 08 2020...
Page 61: ......
