Application Examples
Section 3
S4 Application Manual
Page 24
3.3.8 Single axis indexing parameter list
The following parameter list S4POSI2.DW5 can either be written in the COMBIVIS 5.1
program or manually entered in. You can also request the program from KEBCO, INC.
The line numbers in COMBIVIS will match the line numbers listed below.
The parameters, which may require changes, are listed toward the end of the list. Each
of them has a description written in bold. To change a value, simply locate the parameter
with the desired function, select it in COMBIVIS and enter the new value. Once the
changes have been made the corrected list can be downloaded to the inverter though
COMBIVIS. Be sure to save the modified file to disk when you are finished making the
necessary changes.
Parameter list S4POSI2.DW5
1 ud01 bus password input
= 440
2 Fr09 bus parameter set
= 0: set 0
3 Fr01 copy bus para set
= -1: copy default set
4 Fr02 parameter set source
= 3: terminal (input coded)
5 di02 input logic
= /I5
6 di03 input function I1
= 1: SET
7 di04 input function I2
= 1: SET
8 di05 input function I3
= 1: SET
9 di06 input function I4
= 17: start posi
10 di07 input function IA
= 0: disable
11 di08 input function IB
= 3: extern fault
12 di10 input function ID
= 0: disable
13 di11 input function I5
= 20: posi off
14 di12 input function I6
= 2: reset SET
15 di17 input strobe depend.
= I6+I1+I2
16 di18 select strobe source
= ST+R+I1+I3+IA
17 di19 select strobe mode
= 0: positive transition
18 do01 output condition 1
= 1: enable
19 do02 output condition 2
= 18: speed > speed level
20 do03 output condition 3
= 18: speed > speed level
21 do04 output condition 4
= 23: target position reached
22 do05 output condition 5
= 11: regulator limit
23 do06 output condition 6
= 5: fatal error
24 do09 select OUT1 condition
= do04
25 do10 select OUT2 condition
= 0: no condition selected
26 do11 select OUT3 condition
= do06
27 do13 select OUTA condition
= do02+do03
28 do14 select OUTB condition
= do05
29 do15 select OUTC condition
= 0: no condition selected
30 do17 OUT1 condition logic
= 0: no condition inverted
31 do18 OUT2 condition logic
= 0: no condition inverted
32 do19 OUT3 condition logic
= 0: no condition inverted
33 do21 OUTA condition logic
= /do02
34 do22 OUTB condition logic
= 0: no condition inverted
35 do23 OUTC condition logic
= 0: no condition inverted
36 do24 OUTD condition logic
= 0: no condition inverted
37 do25 out cond. connection
= OA^
38 do26 output filter 1 mode
= 2
39 do27 output filter 2 mode
= 1
40 do28 output filter 1 time
= 49 ms
41 do29 output filter 2 time
= 999 ms
42 do30 filter 1 cond. conn.
= do03
43 do31 filter 2 cond. conn.
= do05
44 An13 AUX function
= 0: disable
45 Le37 speed hysteresis
= 5.0 rpm
46 Pn24 proh. r. stop. cond.
= 6: off
47 SP00 speed setting source
= 3: digital-abs (SP.1) / digital (SP.3)
48 SP01 speed setting absolut
= 0 rpm
49 Pc00 control mode
= 1:on
Summary of Contents for COMBIVERT S4
