Keba ServoA SA52.0100, Operation Manual

Page: 4 / 70

4 ServoA Operation Manual
ID no.: LDS-O-SA-EN-202103
图
Order code
The order designation indicates the relevant design variant of the servocontroller deliv-
ered to you. For details on the order code refer to the ServoA order catalogue.
Order code
Article designation SA 52 - 0075 - 0034 - 0000 - 1
ServoA
Mains supply
(system voltage) 3 x 230 V
3 x 400 V
52
54
Output power
BG2 750 W 0075
BG3
1 kW
1.5 kW
0100
0150
BG4
2 kW
3 kW 0200
0300
BG5
5 kW
7.5 kW
9 kW
0500
0750
0900*
Option Standard 0034
Option details
Without resistor 0 □□□
Without EMC filters □ 0 □□
CANopen
EtherCAT □□ 2 □
□□
3
□
ServoA, no certified STO □□□
4
Hardware information Control board voltage DC24V
0000
Hardware version 1
Note ：
*means when power stage switching frequency is 4KHz.
1) If braking power of motor is larger and the integrated braking resistor can’t get rid of excess
energy, then external braking resistor should be connected;
2) Standard
： without internal braking resistor and EMC filters, with EtherCAT; It can be connected
with resolver and high resolution encoder;
3) The motors match to BG5,please consult with KEBA;
4) If the device with 0 hardware version, please contact KEBA technical engineer.
Figure 0.1 ServoA order code
Rating plate
On rating plates of the ServoA drive units you will find the serial number, from which you
can identify the date of manufacture based on the following key.
Supply package
The supply package includes:
• ServoA drive unit
• Terminal pack for control and power terminals (depending on device power and
variant)
Figure 0.2 ServoA hardware rating plate