Keba ServoA SA52.0100 Operation Manual Download Page 2

Page: 2 / 70

ServoA Operation Manual

ID no.: LDS-O-SA-EN-202103

ServoA - new bus system

Based on the successful experience in the Chinese market for many years, KEBA com-

bines the mature drive technology with leading EtherCAT bus system, creating a brand-

new upgraded servo series for Chinese market —ServoA.

ServoA is a upgraded product with compact design, reliable performance, rich function

and wide application, what could be convenient for customers to build distributed intel-

ligent devices. Traditional design has been upgraded to more automated device, improv-

ing the added value of products. The integrated specific chip of KEBA will provide cus-

tomers with a higher performance of drive ability to meet the demands of improvements.

Through ServoA and other new products, KEBA will continuously develop technical ad-

vantages and contribute to modernization of manufacture of Chinese equipment.

We reserve the right to make technical changes

The content of our documentation was compiled with the greatest care and attention,

and based on the latest information available to us.

We should nevertheless point out that this document cannot always be updated in line

with ongoing technical developments in our products.

Information and specifications maybe subject to change at any time.

Please visit www.keba.com for details of the latest versions.

If the user downloads firmware personally, risks might be caused!

ServoA

Operation Manual

ID no: LDS-O-SA-EN-202103
Date: 03/2021

0180-000055-1

Summary of Contents for ServoA SA52.0100







































































Search results

Summary of Contents for ServoA SA52.0100

Reviews:

Related manuals for ServoA SA52.0100

Brands by name

Popular brands

Keba ServoA SA52.0100, Operation Manual

Search results

Summary of Contents for ServoA SA52.0100

Reviews:

Related manuals for ServoA SA52.0100

Brands by name

Popular brands