Keba KeContact P30 x-series, Configuration Manual

Page: 52 / 76

P30 x-series System overview
Configuration manual V4.02
14
© KEBA
For the connection to an external OCPP backend via GSM, a SIM card must
be installed during commissioning. In addition, GSM must be activated as
connection to the OCPP backend and the access data of the mobile service
provider must be set in the configuration.
The commissioning of the GSM module is described in the "Installation Man-
ual". The technical data of the GSM interface and the SIM card can also be
found in the "Installation Manual".
2.2 Design of a local charging network (master/slave)
A local charging network includes a P30 x-series as master and up to 15 c-
series (P20 and/or P30) as slaves.
Depending on the number of slave charging stations, the design of a local
charging network is implemented differently:
● 1 slave charging station : Direct connection
The slave charging station is connected directly to the master charging
station.
● Multiple slave charging stations : Connection via router or switch
The slave charging stations are connected to the master charging station
via a router or switch.
To enable communication between master and slave charging stations, the
charging stations must be configured in the web interface, see
3 Configura-
tion .
2.2.1 Displays and signals
The display on the front of the charging station provides information about
which communication connection is established.
Display Description
blue | blue | blue | blue
Communication is possible throughout the network.
The master charging station and the OCPP backend are reach-
able.
blue | blue | blue | -
Communication between master and slave charging stations is
possible.
The OCPP backend is not reachable or missing.
- | blue | blue | -
Communication between master and slave charging stations is
not possible.
The OCPP backend is not reachable.