Keba KeContact P30 x-series, Configuration Manual

Page: 54 / 76

P30 x-series System overview
Configuration manual V4.02
16
© KEBA
Using a router
In a network connection using a router, the router automatically provides the
functionality of a DHCP server in most cases.
Information
If the IP addresses are assigned externally (for example, by routers with ac-
tivated DHCP server), the IP addresses must not be in the following range:
192.168.25.xxx
Using a switch
For a network connection using a switch, the master charging station must
be configured as a DHCP server. The IP addresses are then assigned by
the master charging station.
2.2.4 Ports for communication in the charging network
For the correct communication in the charging network, the ports below must
be enabled network-internally.
Information
If necessary, contact your network administrator to enable the ports.
Port Protocol Definition Description
49153 TCP Within the network Socket of the charging station
15118 TCP Within the network
Link connection between the charg-
ing stations (SDP)
15118 UDP Within the network
Link connection between the charg-
ing stations (SDP)
68 TCP Within the network
Transfer of the software update
(Bootps)
68 UDP Within the network
Transfer of the software update
(Bootps)
67 TCP Within the network
Transfer of the software update
(Bootps)
67 UDP Within the network
Transfer of the software update
(Bootps)