Keba KeContact P30 x-series, Configuration Manual

Page: 62 / 76

P30 x-series Configuration
Configuration manual V4.02
24
© KEBA
Read out configuration
In order to be able to transfer the configuration of a P30 x-seriescharging
station to additional P30 x-series charging stations, the USB stick must be
connected to the USB interface (in the connection panel) of the operationally
ready and already configured charging station. The charging station auto-
matically transfers the configuration to the USB stick and displays the
process on the display. When finished, the charging station indicates that the
USB stick can be removed by displaying "remove usb".
Information
Do not remove the USB stick during the writing process! Otherwise it can
not be used for another configuration.
Adapt configuration
If necessary, the configuration saved on the USB stick can be adapted man-
ually. The configuration was saved on the USB stick in the directory
CFG
as
*.conf file. This file can be opened and customized with a text editor on the
PC.
Import configuration
To load the configuration into another P30 x-series charging station, the
USB stick must be plugged in to the desired charging station. The configura-
tion will be imported automatically and adopted after a restart.
The configuration file (P30.conf) on the USB stick can be used to configure
multiple charging stations. If the saved configuration is only valid for exactly
one charging station, the serial number of the charging station must be
added to the name of the saved configuration file.
P30_[serial number].conf