Keba KeContact P30 x-series, Configuration Manual

Page: 58 / 76

P30 x-series Configuration
Configuration manual V4.02
20
© KEBA
Status
The area shows basic information about the configured charging stations
(such as: serial number, IP address, operating state ...). Clicking on the re-
spective IP address opens the KeContact "Information Center" in a new
browser window. It displays charge information such as total power, charge
session power, power, voltage, current, state, and basic log. The scope of
the displayed information is variant-dependent.
System
The area offers the following options:
● Software-Update
● GSM Signal Test
● Logging
● Restart System
Software-Update
The currently installed software versions are displayed. A software update
can also be performed here.
GSM Signal Test
Here, the connection to the set GSM network can be testet.
Logging
Different log contents of the master charging station are displayed.
Restart System
The master charging station can be restarted using this button.
Configuration
The configuration of the charging stations is carried out in this area.
Information
The DIP switch settings are independent of the web interface configuration
and can not be overwritten by software.
The area offers the following options:
● Operating Mode
● Device
● Phase Assignment
● Charging Parameters