Keba KeContact P30 x-series, Configuration Manual

Page: 61 / 76

P30 x-series Configuration
Configuration manual V4.02
23
© KEBA
User settings
This section allows you to make changes to the web interface user name
and associated password. The "recovery key" is also displayed here, which
can also be found on the configuration label. If you have forgotten the web
interface password, you can reset it with the displayed recovery key.
Information
The recovery key must be kept safe for the entire life of the product!
3.4 Enabling the DHCP server
To simplify the setup of a charging network, the master charging station can
be configured as a DHCP server. This function is required for the network
configuration when the master and one slave are connected directly or when
a network connection is implemented via switch.
The DHCP server of the master charging station is deactivated in the deliv-
ery state and can be activated via the configuration in the web interface.
3.5 Configuration in series via USB stick
If you are configuring several P30 x-series charging stations with the same
settings, a created configuration can be saved on a USB stick and thus
transferred to other P30 x-series charging stations.
This requires a (via the web interface) preconfigured P30 x-series charging
station, an empty FAT32 formatted USB stick and a PC.
The following steps are required:
● Read out configuration
● Adapt configuration
● Import configuration
Information
You must enable "Allow USB init" in the web interface of the charging sta-
tion (under Configuration > Device) to read out the configuration, and "Al-
low USB config" to import the configuration.