Operating Instructions CDF3000
4-13
4 Commissioning
DE
EN
FR
IT
ES
FR
Checking the encoder
To check the encoder, rotate the motor shaft by hand.
Attention:
Before the shaft is touched with the hands, the CDF3000
must be placed in the "Safe Standstill" state.
The viewing is from the front onto the end of the shaft (flange). The
"CDF3000 reference and actual values" status display, under "n
ist
, Actual
speed", must indicate a positive speed in clockwise rotation and a nega-
tive speed in anti-clockwise rotation. If the speed is incorrect, check the
following points:
• Is the encoder cable correctly connected to the motor and the posi-
tioning controller?
• Is the encoder cable in use the correct one for the type of encoder?
Summary of Contents for CDF3000
