Keba CDF3000, Operation Manual

Page: 82 / 94

5-4
Operating Instructions CDF3000
5 Troubleshooting
5.3 User errors in
K
EY
P
AD
opera-
tion
5.4 User errors in
S
MART
C
ARD
oper-
ation
Error Cause Remedy
ATT1 Parameter cannot be changed at current
user level or is not editable Select user level 1-MODE higher.
ATT2 Motor must not be controlled via the CTRL
menu Cancel start signal from a
different control location.
ATT3 Motor must not be controlled via the CTRL
menu because of error state Reset error.
ATT4 New parameter value impermissible Change value.
ATT5 New parameter value too high Reduce value.
ATT6 New parameter value too low Increase value.
ATT7 Card must not be read in current state Reset start signal.
ERROR Invalid password Enter correct password.
Table 5.2 User errors K
EY
P
AD
: Reset with
start/enter
Error Meaning Remedy
ERR91 S
MART
C
ARD
write-protected
Use different
S
MART
C
ARD
ERR92 Error in plausibility check
ERR93 S
MART
C
ARD
not readable, wrong positioning controller
type
ERR94 S
MART
C
ARD
not readable, parameter not compatible
ERR96 Connection to S
MART
C
ARD
interrupted
ERR97 S
MART
C
ARD
data invalid (checksum)
ERR98 Insufficient memory on S
MART
C
ARD
ERR99 Selected area not present on S
MART
C
ARD
, no parameters
transferred from S
MART
C
ARD
Table 5.3 S
MART
C
ARD
error: Reset with
stop/return