Notes on EN 61000-3-2 DE
Notes on EN 61000-3-2 EN
(load on the mains due to harmonics)
Our positioning drives and servo controllers are "professional
equipment" in the context of EN61000 such that with a nominal
connected load
≤
1kW they fall within the scope of the standard.
On the direct connection of drive units
≤
1kW to the public low
voltage grid, either measures to conform with the standard are
to be taken or the responsible utility must grant approval for
connection.
If you should use our drive units as a component in your
machine / system, then the scope of the standard is to be
checked for the complete machine / system.
(limits for harmonic current emissions)
Our frequency inverters and servocontrollers are "professional
devices" in the sense of the European Standard EN 61000, and
with a rated power of
≤
1kW obtained in the scope of this stand-
ard.
Direct connection of drive units
≤
1kW to the public low-voltage
grid only either by means of measurements for keeping the
standard or via an authorization of connection from the respon-
sible public utility.
In case our drive units are used as a component of a machinery/
plant, so the appropriate scope of the standard of the machin-
ery/plant must be checked.
Summary of Contents for CDF3000
