Keba CDF3000, Operation Manual

Page: 59 / 94

Operating Instructions CDF3000
4-5
4 Commissioning
1
2
3
4
5
A
DE
EN
FR
IT
ES
FR
4.2.2 Serial commis-
sioning with
D
RIVE
M
ANAGER
Prerequisite:
• All positioning controllers are completely connected.
• The
first
drive has already been fully taken into operation.
• A notebook with the user software D
RIVE
M
ANAGER
installed is con-
nected.
For further information concerning the D
RIVE
M
ANAGER
please refer to the
D
RIVE
M
ANAGER
manual.
Step Action Comment
1
Connect your notebook with the posi-
tioning controller of the
first drive
and switch on the mains supply for
the positioning controller (X4).
Use a standard serial cable (9-pin D-
SUB, socket/plug) and an opto-isolator.
2
Start D
RIVE
M
ANAGER
.
Automatically links the connected
positioning controller.
If the connection setup fails you should check the settings in the
menu
Extras > Options and retry it via the icon
.
3
Save the current dataset by
clicking on the icon
,
either to the parameter
database (directory: c:/../userdata) of
the D
RIVE
M
ANAGER
or to a floppy disk
(a:/).
The icon always saves the most cur-
rent dataset of the connected unit.
Name the file as desired.
4a
Use this icon to disconnect
from all devices
4b
Connect your notebook with the positioning controller of the next drive and
switch on the mains supply for the positioning controller.
5
Click on icon to establish a
link between the D
RIVE
M
AN
-
AGER
and the newly con-
nected device.
6
Click on icon to load the
dataset saved in step 4 into
the device.
7
Use the icon to select the
main window.
Save the settings with the
button -
>
Repeat steps 4 ... 7 for all further drives.
Save dataset from unit to file
Load dataset from file into
unit
Please remember to save the
setting.