Keatec Energy DBL MX-U Series Page 12 Manual Download

Page: 12 / 50

4.4 Communication Port Explanation

The MX-U Series UPS are equipped with a true RS-232 & USB communication port as standard to provide

communication with bundled UPS monitoring software for remote monitoring of the UPS status using a PC.

In addition, there are six optional interface cards available to meet various communication needs: USB, EPO/ROO,

DCE (dry contact relay card), R2E, USE, and an SNMP/Web card. (Please see Chapter 8.)

The software bundled with the UPS is compatible with many operating systems, including Windows 98 / Me / NT /

2000 / 2003 / XP / Vista / 2008 / 7 / 8 , Novell, NetWare, Unix, Linux 2.6.x, Mac OS X v10.5 Leopard, Mac OS X

v10.6 Snow Leopard please contact your local dealer for suitable software.

All communication ports including optional cards can be active and used simultaneously to monitor the UPS status.

However, only one communication interface at a time (the one with the highest priority) can control the UPS. The

priorities of these communication interfaces are as follows (highest priority first).

This is the layout, located on the

right side the LCD control

panel.

DBL MX-U Series UPS Outdoors 1000-2000W 120V Manual English

20180312

- This manual is for qualified personnel only

Summary of Contents for DBL MX-U Series



















































Search results

Summary of Contents for DBL MX-U Series

Reviews:

Related manuals for DBL MX-U Series

Brands by name

Popular brands

Keatec Energy DBL MX-U Series, Manual

Search results

Summary of Contents for DBL MX-U Series

Reviews:

Related manuals for DBL MX-U Series

Brands by name

Popular brands