KE LOGEM 928, Operation Manual

Page: 53 / 200

53
Operation Manual V.34- Modems, Version 07/97
ON
Chapter 2
2.3.2 Basic Setting 0
In delivery state the modems come with basic setting 0. All DIP switches
are in OFF position.
Connection: dial line
Operation mode: automatical detection of modulation (V.22 ... V.34)
DTE interface: autom. detection of transmission rate at 8 data
bits, no parity
Data protection: normal mode (MNP or V.42 is possible)
Data compression: active (MNP5 or V.42bis)
Data flow control: hardware (RTS/CTS)
Call acception: after first ring
Command phase: AT command
Command echo: On
Reports: On, text reports
misc.: password protection and remote servicing
deactivated
2.3.3 Basic Setting 1
Here DIP switch S2.6 (S3.2) is in ON position and all other switches are
in position OFF to load the basic setting 1.
Connection: dial line
Operation mode: V.22bis (2400 bit/s)
DTE interface: 2400 bit/s at 8 data bits, no parity
Data protection: direct mode
Data compression: not possible
Data flow control: hardware (RTS/CTS)
Autom. call acc.: deactivated
Command phase: AT commands
Command echo: On
Reports: On, text reports
misc.: password protection and remote servicing
deactivated
Switches Description