KE LOGEM 928, Operation Manual

Page: 115 / 200

115
Operation Manual V.34 - Modems, Version 07/97
REG
Chapter 4
S60 Data Format Online Phase
register values / default description
S60 0...11 / 0 data format online phase
0 8 data bits, no parity, 1 stopbit
1 8 data bits, odd parity, 1 stopbit
2 8 data bits, even parity, 1 stopbit
3 8 data bits, no parity, 2 stopbits
4 8 data bits, odd parity, 2 stopbits
5 8 data bits, even parity, 2 stopbits
6 7 data bits, no parity, 1 stopbit
7 7 data bits, odd parity, 1 stopbit
8 7 data bits, even parity, 1 stopbit
9 7 data bits, no parity, 2 stopbits
10 7 data bits, odd parity, 2 stopbits
11 7 data bits, even parity, 2 stopbits
Due to the separated adjustment of data formats for the online and
command phase the modems allow for operation with different data
formats (i.e. with 7E1 during command phase and 8N1 for online phase).
During reliable and auto reliable mode (MNP4/V.42) 8 data bits are
transmitted constantly. The data format towards the terminal equipment
is defined with register S61. This means that start, stop and parity bits
are added at the local modem constantly.
The bits are transmitted transparently at data transmission in direct mode.
During a transmission with the data format 8 data bits, even parity, 1
startbit and 1 stopbit all 11 bits are transmitted from the local modem to
the remote terminal equipment. The data transmission rate is identical
for these transmission procedures. Data flow control is not necessary in
these cases.
Register Description