KE LOGEM 928, Operation Manual

Page: 110 / 200

110 Operation Manual V.34 - Modems, Version 07/97
REG
Chapter 4
S12 Break Sequence Guard Time
The register defines the time (in ms) the modem has to wait before and
after a break sequence to be able to detect the break sequence. A break
sequence consists of three consecutive break characters to be specified
in register S2. The register is not valid for direct mode.
Example: ATS12 = 45 (CR), guard time 45 x 20 ms = 900 ms
register values / default description
S12 0...255 / 45 (900ms) break sequence guard time
(unit: 20 ms)
S20 Dial Abort Character
The register defines the modem operation with receiving of characters at
the V.24 interface during the dialing process.
register values / default description
S20 0...255 / 255 dial abort character
0 the modem ignores all characters
coming from the V.24 interface
during dialing
1...254 dialing is aborted if the modem re-
ceives a character with the selected
decimal value
255 dialing is aborted whenever the mo-
dem receives an arbitrary character
S26 S2/M2 Delay Time
If you have selected S2/M2 simulation with the command AT&R0 the
register specifies the duration of the S2/M2 delay.
register values / default description
S26 0...255 / 4 (40ms) S2/M2 delay time
(unit: 10 ms)
Register Description