KE LOGEM 928, Operation Manual

Page: 114 / 200

114 Operation Manual V.34 - Modems, Version 07/97
REG
Chapter 4
S54 Function of Da/Te Button
The register defines the function of the Da/Te button at the front plate of
the modems. The button is designed to perform the functions listed below:
register values / default description
S54 0...5 / 1 function of Da/Te button
0 activate test loop
1 data button
2 direct call
3 direct call / disconnection
4 data button / disconnection
5 button locked
Description of the functions:
Activate test loop: A remote test loop is switched at an existing
connection. If the modem is in command mode (OFFLINE) the local loop
is switched.
Data button: The modem accesses the line after manual dial up if the
button is pressed. Disconnection is possible with DTR/S1.
Direct call: The modem dials the number specified with the command
AT&Z0=xxx. An existing connection is terminated with DTR/S1 (ref. to
AT&D(n)).
Direct call / disconnection: The modem dials the number specified with
the command AT&Z0=xxx. An existing connection is terminated by
pressing the Da/Te button again.
Data button / disconnection: The modem accesses the line after manual
dial up if the button is pressed. An existing connection is terminated by
pressing the Da/Te button again.
Button locked: The button is disabled.
Register Description